Monday, August 13, 2012

Gundam Assault Carrier Spacecraft

So, like, a long time ago (well it seems that way to me. hmph.) I went to college and majored in industrial design. I really wanted (still do) to be a toy designer or to be somehow connected to the collectibles market.

As you can imagine, I got pretty bored of the housewares and more mainstream stuff we were instructed to design there. So, for my graduation project (a two quarter project where we get to pick a design category and direction that we want) I chose to do something inspired by one of my favorite companies, Bandai.

The project was from start to finish: design goal > research > ideation > refinements > control drawings > presentation/final model.

This was long before I knew I would be doing props after college (or blogging about them at all) so I have no pictures as far as the "prop" itself goes. Speaking of which, I consider this to be a prop so here it is. Deal with it!

It was designed to go with Bandai's Gundam action figure/model kit line, as well as compliment other sets in the same line.

First things that popped into my head. 

I really like the middle right one on page 3 but it would have been a bitch an a half to make a model of. 

Some refinements and new aggressive shapes.

Chosen design direction

These are the features I wanted. I think it translated pretty well into the model, although I never finished those little magnetic bridges.

She sure do look purdy.

Slots and keys hold this together, as well as a bunch of tiny rare earth magnets. The production version would obviously utilize tabs.

This is the "cityscape" arrangement of the parts. Had I finished the bridges and made a few more of these, I could have had the ultimate geekfest. 


Tuesday, August 7, 2012

Kyle Katarn's Bryar Pistol V2

I was approached by (More like barraged by!) someone on the cosplay forums to make this for them.

He provided This as a reference:

Some of you may remember way back when I made this. It was the first prop gun I ever made (If you don't count the sentry) It looks very similar to this one as they are supposed to be the same thing. but there are many conflicting sources on how this piece looks, and those sources themselves are scarce. Fans like Koda Vonnor and Arkos have had to fill in the blanks. This version is the Arkos version.

I very rarely build the same things twice, but since this doesn't share a single part with the first one, I decided to give it a go.

Bare with me here. Most of my pictures for this build were taken on my cell phone. My cell phone isn't with us here today thanks to.... "neurological issues".

Luckily I snapped this picture in its raw material build up before primer. That should tell half of the story. The other half of the story is cutting out all fo those #@%$^@^ circle vent things and the spacers that go between them, all by hand. (I don't believe in the laser cutter yet have access to several)

Styrene, MDF, tubing. nothing new here.

Last time, the tip was made completely out of styrene. This time I cut out the tip and notches in MDF, then laminated both surfaces in styrene.

To get the organic lines above the grip, I called up my friend Bondo.

The reference didnt have grips, just a checker pattern on the handle. I added these because they would compliment the brown on the top of the gun.

Primed up

By alternating styrene and MDF circles laminated together, I would get much more precision than using a lathe for the top "heat sink" (Wasn't fun to sand though!)

Did the basecoat in black, then espresso brown for the top and grips.

Oops. Forgot about those countersunk screws...

One more for the books.

Till next time!

Facebook Page